Autor
| Yamaha CX5MII/128 Upgrade to MSX2
|
manuel
msx guru
Mensajes: 3381 |  Publicado: Noviembre 16 2007, 15:11 |
Are you saying that the original has 64kB VRAM?? AFAIK all MSX1's with V9938 have 16kB VRAM. There's no reason to add anything bigger anyway...
Great write up though!
|
|
Jipe
msx freak
Mensajes: 185 | Publicado: Noviembre 16 2007, 18:21 |
the original CX5MII as 16K Vram same all MSX1 with 2 x 16k x 4bits chips
with 128k memory is 4 x 64k x 4bits
|
|
grit
msx novice
Mensajes: 25 | Publicado: Noviembre 19 2007, 20:49 |
my fault and fixed, thanks!
|
|
AuroraMSX
msx master
Mensajes: 1231 | Publicado: Noviembre 21 2007, 00:26 |
|
|
dicksch
msx friend
Mensajes: 6 | Publicado: Noviembre 23 2007, 17:10 |
Got my CX5MII/128 to work. Found that I had a corrupted COMMAND2.COM file. Once I got that corrected the machine booted perfectly. Now have a CX5MII/128 (no clock chip even though all the parts are installed except for the RP05C) with a Sunrise IDE interface connected to a Hard disk and a CDROM. Since I have a single sided floppy drive the trick was to move only one file at a time on the floppy from a DOS PC to the hard drive. The second file would always be corrupted. Now with the CDROM I just burn all the downloaded software with my Slackware Linux machine and then move it to the CX5M. I would like to get the all the extra files from the MSX-DOS 2.
|
|
|
|
|
