V9938 programmers' guide

@ARTRAG:
1. page 100 corrected
2. IC and TP - what you have to suggest concerning further description of IC and behavior of TP in SM1?
3. Links to text in the contents section: done

@Daemos:
1. "TR bit it set to" corrected, pages 67, 76
2. LMMC on page 76 corrected to 1011
3. Page 69: while register is used as pointer to source X in this command, it's still DX. See page 22. No idea why they decided to use R36 and R37 instead of R32 and R33 to point to source X (unless there's a mistake in documentation - can only be proven through testing on real VDP)
4. page 85: see previous item
5. Missing table borders on pages 66, 69, 73, 75,78 and 83 are corrected. Yes, there's a pattern as I was doing copy-paste
6. Write to palette registers auto-increment: added

Thank you ARTRAG and Daemos for suggestions!
New version was uploaded.

The IC bit is in the table and concens SM2
I would have added a short description in the text
Please give your example of the description

The TP bit is at page 107: the text refers to screen 8
I would make clear how TP=1 works when in other screen modes
And how it works in other screen modes?

Does anyone have more details?
Yes, we really need a proof of that. When I was working on the guide, all the things I was unsure about were tested. We need to keep it responsibly

Page 30, "3.2.3. Pattern layout table settings", says "This table has 40*24 (2160) locations...", but I think it should be something like 80*27 to get that 2160. And in the end of the same paragraph, "...an upped half of 27th..." should be "...the upper half of the 27th..."

@yzi and ARTRAG: thank you. Document updated, direct link.