TurboR PCB prototype with V9990?

Page 1/2
| 2

By Ivan

Ascended (9305)

Ivan's picture

02-07-2006, 11:59

Take a look: link

I see one cartridge slot.

Login or register to post comments

By Haohmaru

Paladin (774)

Haohmaru's picture

02-07-2006, 12:08

O_o That might be one of those v9990 evaluation boards, how cool is that?

(Also pointless if you have a GFX9000, but I think collectors will go into drool-mode over this one Wink)

By karloch

Prophet (2157)

karloch's picture

02-07-2006, 12:20

Woah, is that the famous PCB of the MSX3 prototype? According to seller description, there is not R800 on the board, just V9990, Z80 CPU and I/O.

By Ivan

Ascended (9305)

Ivan's picture

02-07-2006, 12:21

It's the GFX9000 prototype from Sunrise Tongue Tongue Tongue

By flyguille

Prophet (3028)

flyguille's picture

02-07-2006, 20:42

WOWWWW!!

By PingPong

Prophet (3888)

PingPong's picture

02-07-2006, 21:45

In the photo i cannot see any v99x8 on board, how they assure msx2 compatibility at HW level?

By karloch

Prophet (2157)

karloch's picture

02-07-2006, 22:57

In the photo i cannot see any v99x8 on board, how they assure msx2 compatibility at HW level?Rumours said that Panasonic never achieved that, it was not economically viable. With that failed attempt, Panasonic left the standard and officially MSX became comercially dead.

By flyguille

Prophet (3028)

flyguille's picture

03-07-2006, 01:44

No!, this PCB hasn't a spare socket for z80!...note that the socket is 14x2DIL so, it is for ROM.

surely it must be controlled by mean of that bus. OR

what chip is that other surface chip near of the brown connector? a msx engine maybe????

By flyguille

Prophet (3028)

flyguille's picture

03-07-2006, 01:50

the other surface chips hasn't enought pins as for be a msx engine, maybe it is a logical jungle.

By flyguille

Prophet (3028)

flyguille's picture

03-07-2006, 02:29

well, the other surface chip has 44pins, not enought for z80 or msx engine what hell is that chip!!

By flyguille

Prophet (3028)

flyguille's picture

03-07-2006, 03:45

I needs pictures with more resolution!!!!

but with that i can see, the bus connector, has the pin 10 grounded, and it is BUSDIR!!!! .... shit seems that it is not a MSX bus connector.

but anyway i needs picture with more resolution to do a correct analisys

Page 1/2
| 2