NOP MOD Player v2.0 | MSX Resource Center (Page 5/12)

Par SjaaQ

Champion (375)

21-04-2020, 18:16

ToriHino wrote:

Nice updates With 'too many 9xx variations' you mean you run out of the number of sample headers?

Exactly!

Par SjaaQ

Champion (375)

21-04-2020, 20:16

Build 1762:

Fixed an issue with 9xx command skipping the waveheader creation when no sample was specified in the step
Fixed an issue with Dxx command (pattern break)
Fixed an issue pause toggle which ignored the current note to be played
Added shortkey 'STOP' which stops playing and resets position

Par Latok

msx guru (3938)

21-04-2020, 21:11

This is getting better and better

Par knm1983

Hero (575)

22-04-2020, 10:05

Hi guys, I have tried this latest version, but something happens, all the Mods work wrong for me.
shhhhh sound on music samplers.
I have tested it on my Turbo R ST with Wozblaster with 2mb SRAM and Original Moonsound with 1M SRAM
The Old versión working ok for me.

Thanks for this work

Par SjaaQ

Champion (375)

22-04-2020, 13:25

knm1983 wrote:

... all the Mods work wrong for me.
shhhhh sound on music samplers.
I have tested it on my Turbo R ST with Wozblaster with 2mb SRAM and Original Moonsound with 1M SRAM

So there is nothing I can do with this report. I have no Turbo-R and I am also not sure what the old version is.

The only way for me to fix anything if it either runs on my NMS8280 or OpenMSX. And I would be nice if you have some video to show the issue.

Par ToriHino

Paladin (857)

22-04-2020, 13:56

For what it's worth, i tested it on a Turbo-R as well and now always get the following output:
NOP MOD Player v2.0 (c) NOP 2020 - Build: 1762
You are here:3-0
Memory reported: 80KB
ERROR:Not enough memory
ERROR:File handling

This is on a standard Turbo-R ST with 256KB and a DalSoRi v2 OPL4 with 2MB memory active.

Par Grauw

Ascended (10768)

22-04-2020, 14:28

Be aware of the OPL4 maximum access speeds described on page 8 of the manual. Additionally there is a wait required after setting the wave table number (see page 16).

You can either hard-code the specified amount of time (R800 timing information here), or poll the BUSY and LD flags in the status register (see page 9 / 10).

Par knm1983

Hero (575)

22-04-2020, 14:30

Hello, I also have an NMS8280 to test, I will test now.
Regarding the version, I am using build 1762, I have my Turbo R ST with 512k ram internal.
Then I will record a video to show.
Build 1762
You are here:3-0
Memory reported:336KB
Allocating Memory:128KB

Par knm1983

Hero (575)

22-04-2020, 14:37

I already test on my NMS8280 and Mod work perfectly

Par knm1983

Hero (575)

22-04-2020, 14:59

It seems that the Turbo R in Z80 mode works, but some notes of the music sound bad, as if it were another different note.

Maybe it can be the access in the Turbo R as Grauw comments.