[blueMSX] Emulating OBSONET and TCP-IP UNAPI

Pagina 2/2
1 |

Van ducasp

Paladin (677)

afbeelding van ducasp

20-03-2020, 22:45

Cool, once I end my current side project, will look into that... I don't think that starting a new fork and maintain it in parallel, but, perhaps, even if OpenMSX team ultimately decide it is not something they want to pick up, we might end up with one version that can be used to develop unapi tcp-ip software.

Thanks S0urceror and Manuel!

Van Manuel

Ascended (19321)

afbeelding van Manuel

21-03-2020, 00:03

Pull Requests are most welcome any time!

Van flok

Resident (34)

afbeelding van flok

29-03-2020, 22:40

If MSX has spi in some way, you can use the https://www.microchip.com/wwwproducts/en/en022889

Van dmr

Ambassador (0)

afbeelding van dmr

29-03-2020, 23:45

Well, that's easy. Either connect an Arduino or an ESP (8266/12E/32/..) to the cartridge port.

Arduino: connect and ENC28J60 "board" (not the chip, but a whole print or an Arduino-Shield). An Arduino can be connected directly to the databus on the cartridge port.

ESP: There are several enthusiasts working on initiatives. An advantage of using ESP is that you don't need ENC28J60 as the ESP already has wifi (and SPI, and RS232, and I2C, etc).

... it requires some soldering, programming and stuff. But you can do it yourself and it is all based on fairly cheap components (about 10 to 30 euro's depending on how nice you want it to be)

Lots of cool developments and more to come ;-)

Pagina 2/2
1 |