Latest firmwares for Gouda MSX-SCSI interface | MSX Resource Center (Página 3/3)

Por Manuel

Ascended (19468)

25-11-2015, 12:00

Sure, but as you added the wrong info and I was in no position of doing it (phone is not easy), I called on you

Por gdx

Enlighted (6215)

04-12-2015, 09:04

I improved the bios Novaxis 25-08-96 1.59.64 !

novaxis-25-08-96-1_59_64-gdx.zip

Does someone can try it?

Modifications:

When we press to prevent the interface to activate the following
text appears:

Novaxis SCSI will be disable
if you press GRAPH again.

At this moment you can press / to enable/disable the interface.
Press Graph again to continue. It is useful if a firmware or another
cartridge uses same Key for another function.
Fixed bug that freezes on "WAIT ..." when we press DEL to configure
the interface.
If you press DEL during the startup, you should stop pressing DEL when
"Hit DEL to run Setup" will be displayed to continue. Press DEL again
if you want configure the interface. This method is useful for MSX2
from Panasonic because DEL is used to disable the firmware.

Por edoz

Prophet (2482)

04-12-2015, 09:05

Wow ... cool an update on this device! To bad i don't have this device, (I only have the SLOW Bert Interface).
But somehow i like all those SCSI devices!

Por raymond

Hero (643)

04-12-2015, 09:19

Thnx. I can test it if I know how I can get this into my Novaxis interface...

Por gdx

Enlighted (6215)

04-12-2015, 09:50

You need a eprom eraser and a eprom programer but the worst is the eprom that is soldered.

1/ When we press Graph to prevent the interface to activate the following
   text appears:

    Novaxis SCSI will be disable
    if you press GRAPH again.
  
   At this moment you can press Right/Left to enable/disable the interface.
   Press Graph again to continue. It is useful if a firmware or another
   cartridge uses same Key for another function.
  
2/ Fixed bug that freezes on "WAIT ..." when we press DEL to configure
   the interface.
   
3/ If you press DEL during the startup, you should stop pressing DEL when
   "Hit DEL to run Setup" will be displayed to continue. Press DEL again
   if you want configure the interface. This method is useful for MSX2
   from Panasonic because DEL is used to disable the firmware.

Por raymond

Hero (643)

04-12-2015, 10:55

Luckily mine isn't soldered but in a socket... That was a request when I bought one to make it easier to upgrade Ok, then I will only need someone with the ability to erase and program an eprom.