list of interested third batch MSX Zemmix Neo:

Страница 3/17
1 | 2 | | 4 | 5 | 6 | 7 | 8

By sergem

Expert (117)

Аватар пользователя sergem

19-08-2015, 20:44

hello,
i registered also just a few questions:
when and how do i have to pay for the zemmix,
is there a usb port if you like to connect a usb keyboard for example ..?

kind regards

By fzanoto

Master (190)

Аватар пользователя fzanoto

19-08-2015, 20:47

Yes, the USB port, works for USB-PS / 2 keyboards
the payment of the third stage will begin only when I finish the second stage.

By sergem

Expert (117)

Аватар пользователя sergem

19-08-2015, 20:54

ok thanks for the quick reply!! Big smile

By mfeingol

Champion (294)

Аватар пользователя mfeingol

19-08-2015, 23:40

I'm in the second batch, so it may be time to start provisioning myself. :-)

So, three questions:

1) Is the maximum SD card size 2GB or 4GB? I'm seeing conflicting information out there. Clearly SDHC/SDXC aren't supported, but some older SD readers can handle 4GB and some can't.
2) Will any USB keyboard work, or are there limitations? I've seen conflicting information on that as well.
3) While we're on the topic, does anyone have any recommendations for a nice compact gaming keyboard to use with a Zemmix Neo?

Thanks.

By giuseve

Paladin (813)

Аватар пользователя giuseve

20-08-2015, 16:47

OK,
signed in !!

Intersted in:
Choosing Case Color
Customization of the boot logo

By AxelStone

Prophet (3199)

Аватар пользователя AxelStone

20-08-2015, 23:03

mfeingol wrote:

I'm in the second batch, so it may be time to start provisioning myself. :-)

Me too, I really loves the design, I'm thinking seriously to buy another one in this batch Wink

By PipoBimbo

Supporter (12)

Аватар пользователя PipoBimbo

21-08-2015, 12:29

Thanks, I just registered from France Smile

By fzanoto

Master (190)

Аватар пользователя fzanoto

21-08-2015, 15:45

for once, a little trouble with the Utsource,
It gives work to straighten the pins:



By AxelStone

Prophet (3199)

Аватар пользователя AxelStone

21-08-2015, 16:28

fzanoto wrote:

for once, a little trouble with the Utsource,
It gives work to straighten the pins:

Bad for them: it gives work and it's dangerous, it's easy to break such thin pin when you try to straight it.

By Patsie

Master (254)

Аватар пользователя Patsie

21-08-2015, 16:32

Just registered for one as well. Looking forward to the next batch. Smile

Страница 3/17
1 | 2 | | 4 | 5 | 6 | 7 | 8