Procedure to write YRW801-M Rom of the moonsound on 27C160 chip

By alali.ahmed.t

Master (132)

Аватар пользователя alali.ahmed.t

08-11-2022, 05:07

Does any one has the procedure to do that? I have built a Wozblaster and I need the procedure to write the complete file that is about 2MB in size into 27C160 chip. I have the complete file, I found other procedures where you write the files in parts but the file I have is a complete 2MB.

Для того, чтобы оставить комментарий, необходимо регистрация или !login

By alali.ahmed.t

Master (132)

Аватар пользователя alali.ahmed.t

08-11-2022, 05:25

I have my way of dividing the complete 2MB moonsound file into 4 X 512KB parts and then upload part by part into the 4 banks of the 27C160. I will give that a try and see how things go.

By Pencioner

Scribe (1530)

Аватар пользователя Pencioner

08-11-2022, 09:07

that should work. it is the same as you would do with use of an adapter

By alali.ahmed.t

Master (132)

Аватар пользователя alali.ahmed.t

08-11-2022, 23:13

Pencioner wrote:

that should work. it is the same as you would do with use of an adapter

Thank you for the link, very useful.

By Wierzbowsky

Guardian (3541)

Аватар пользователя Wierzbowsky

09-11-2022, 14:29

I have the boards and all parts for this adapter except for the ZIF socket. These are leftovers from building an adapter for my own needs. Please contact me if interested. The socket is expensive, so I ordered only one piece from Poland.

I also have those 2mb EPROM chips - leftovers from the time when I assembled a Wozblaster.

By crisag

Resident (55)

Аватар пользователя crisag

09-11-2022, 21:44

I got a few 48P ZIFs from AliExpress recently.

By alali.ahmed.t

Master (132)

Аватар пользователя alali.ahmed.t

09-11-2022, 23:52

Wierzbowsky wrote:

I have the boards and all parts for this adapter except for the ZIF socket. These are leftovers from building an adapter for my own needs. Please contact me if interested. The socket is expensive, so I ordered only one piece from Poland.

I also have those 2mb EPROM chips - leftovers from the time when I assembled a Wozblaster.

Thanx a lot., I got one but it was not good to be used with my TL866 programmer, I had to return it and ordered another one similar to the you posted. I should check next time in the forum because I may save some money that way :)