Composite monitor (5-pin DIN 41524)
This page was last modified 03:04, 16 December 2021 by Mars2000you. Based on work by Gdx and Rderooy.

Contents

Description

Connector DIN 41524, 5 pin, type 5a

Many NTSC MSX1 systems sold by Yamaha and Victor use a 5-pin DIN 45324 connector (type 5a, at 45°) labelled as "monitor". This is the same type of connector as used for MIDI.

Pinout

Pin Name Description
1 AV (+5V) AV control output, go to AV control input on the RGB21 connector (pin 11), on SCART it must be +12V (pin 8) otherwise some TVs will not be able to display the correct ratio *)
2 GND Ground (connect it to all corresponding ground of the SCART *)
3 SOUND Analog sound output, 75Ω (connect it to pin 6 of the SCART *)
4 VIDEO Composite video output (connect it to pin 20 of the SCART *)
5 N.C. / RF When RF is connected, it can be used instead of other signals. It has to be connected to the antenna input of old NTSC TVs that had no other input connector. The image is of lower quality. This pin is not connected on most models.


(*) Valid only if the TV's SCART supports composite video signal.

Composite Video Cable Schematic

Yamaha Monitor Cable Schematic.png

Systems with this connector

Options sold for use with this connector